If anyone has a Winegaurd G2 antenna and having problems with certain channels on SD only and the 119 satellite not working there is an update. You cannot do the update on your G2. You will need to go to a Dish store or bring it to a place with a standard dish to do the update. Another thing is just going into diagnostics and tools and doing the software update there will not work. Instead go to a channel on the 119 satellite such as channel 105 and put the receiver in standby mode by hitting the power button. After 4 or 5 minutesit will go into stand by. Let it sit for a few more minutes and it will start downloading the update. Don't panic if part way through it goes back into stand by and then back to the screen just let it finish. When it is done it will re-boot and then program the new vital update in. Hope this helps someone.