Pairing a Remote to a TV

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Pairing a Remote to a TV

TashaC
Costume Designer

 

 

 

 

40.0/50.0/52.0/54.0 Remotes

  1. Press the HOME button twice or the MENU button once, depending on your remote
  2. Select Settings
  3. Select Remote Control
  4. Arrow to and select the device code you want to learn
  5. Select the appropriate Pairing Wizard for the device
  6. Arrow to and select the brand of the device
  7. Select Next
  8. Press the VOLUME UP button to test the remote (if device is not a TV, press power button)
  9. If the remote works, select Finished
  10. If the remote does not work, select Try Next Code
  11. Repeat steps 8-10 until a working code is found

 

20.0/20.1/21.0/21.1 Remotes

  1. While at the device location, point the remote at the device.  If programming to a TV, press and hold the TV button on the remote until all four mode buttons light up. If programming to any other device type, use the AUX or DVD buttons. 
  1. Enter the three-digit remote control code. The mode button you selected will light up.  If you are programming a code into AUX Mode, you must do the following before entering the device code:
    1. Press 0 for a TV (if TV code is 500, enter 0500)
    2. Press 1 for a VCR/DVD (if DVD code is 617, enter 1617)
    3. Press 2 for any other device (if device code is 639, enter 2639) 

Note: The three-digit remote control code can be found here.  Select 20.0, 20.1, 21.0, 21.1 as your remote type and the link to determine the three-digit code can be found in step 2.

 

  1. Press the POUND (#) button.  The mode button you are programming will flash three times.
  1. Press the POWER button.  The device will turn off.

 

https://www.mydish.com/support/products/remotes/how-to/program-to-tvother